Tip: If your coming via link from Google search results to this "SubWiki",
     please click on the Home Icon at the upper right corner area to go to
     the main Wiki "Howto Boot OS/2 - eCS from USB Mass Storage Devices ( MSD )"
     

EeePC Linux Preload HDD Layout documented by DFSee V8-17, DaniS506.add, IBM1S506.add

[Edit]1 EeePC HDD Info by DFSee V8-17

DFSee Dos32  8.17 : Executing: map -M -m

Command timestamp : Sunday 2008-01-27 12:45:24

Disk  DFSee  Disk   Image filename or
 id   type    nr    (Unix) device, and optional partitionable media description
====  =====  ====   ===========================================================
  1   Phys     1    /dev/hda          Physical disk  1 (IDE/SCSI/USB or PCCARD)
  2   Phys     2    /dev/hdb          Physical disk  2 (IDE/SCSI/USB or PCCARD)

Number of disks   : 2

Ext Int13 version : 3.0  flags: 0005 Support for GetParam, Read and Write: yes
Extended Int-13   : Present, will not be used    ( less 1024 or -I used)
 P-Geo Disk 1 Cyl :  7753 H: 16 S:63  Bps:512   Size : 0x00773F70 =  3815.9 MiB
 L-Geo Disk 1 Cyl :   486 H:255 S:63  Bps:512   Size : 0x00772266 =  3812.3 MiB
 BIOS Int13 limit : none, no limit for this disk
 MBR crc d19c290f : 0x3beae060 = Linux GRUB loader and bootmanager

Ext Int13 version : 3.0  flags: 0005 Support for GetParam, Read and Write: yes
Extended Int-13   : Present, will not be used    ( less 1024 or -I used)
 P-Geo Disk 2 Cyl :   998 H: 32 S:63  Bps:512   Size : 0x001EB400 =   982.5 MiB
 L-Geo Disk 2 Cyl :   998 H: 32 S:63  Bps:512   Size : 0x001EB340 =   982.4 MiB
 BIOS Int13 limit : none, no limit for this disk
 MBR crc 054b4eb9 : 0x0c8ca699 = DFSee generic MBR, English messages, I13X


+--(disk  1)---(/dev/hda )---(Disk1 - 3812.3 MiB ) ----------------------------+
| |+=========================+|         |+====================++======++======+|
| ||                         ||         ||                    ||      ||      ||
|m||1                        ||2        ||2                   ||3     ||4     ||
|b||                         ||         ||                    ||C:    ||      ||
|r||EXT2                     ||FreeSpace||EXT3                ||FAT12 ||-     ||
| ||                         ||         ||                    ||      ||      ||
| |+=========================+|         |+====================++======++======+|
+------------------------------------------------------------------------------+

+--(disk  2)---(/dev/hdb )---(Disk2 - 982.4 MiB )----------------------+
| |+===========================================================+|     ||
| ||                                                           ||     ||
|m||5                                                          ||7    ||
|b||                                                           ||     ||
|r||HPFS                                                       ||FreeS||
| ||                                                           ||     ||
| |+===========================================================+|     ||
+----------------------------------------------------------------------+

DFSee Dos32  8.17 : Executing: fdisk -r-
Command timestamp : Sunday 2008-01-27 12:45:24
 Pid01=   WARNING : NO partition is marked active on the first disk
                    Booting requires modern BIOS or smart MBR code!
 Pid03=C: WARNING : FAT16 FS found in FAT32 systemtype (0b/0c) expected 06/0e!
 Pid03=C: WARNING : Bootsector HiddenSectors field does NOT match partitiontable!
                    ONLY when this causes problems, you may try to fix it by
                    opening the partition and use the FIXPBR cmd or menu item
                    Mode=xx -> Boot area fixes -> Fix HiddenSectors/Geo value
 Pid04=   WARNING : Not formatted or invalid boot record
 Pid05=   ERROR   : Mismatch Geometry + CHS-Begin with LBA offset
 Pid05=   ERROR   : Mismatch Geometry + CHS-End with LBA offset+size
          Causes: - change in BIOS level or BIOS settings for LBA
                  - changed EIDE/SCSI disk adapter (or firmware)
                  - changed DISK/SCSI device drivers or filters
                  - partition-table corruption, possibly by a Virus
                  - bad CHS (dummy) values by buggy partitioning tool
 Pid05=   WARNING : Bootsector GEO Heads/Sectors fields do NOT match geometry!
 Pid05=   WARNING : Partition does not start on Head-1/Sector-1 (cyl boundary)
 Pid05=   WARNING : Partition doesn't end on last Head & Sector (cyl boundary)
+---+--+-----------------+--+--------+--------+-----------+----------+--------+
|ID |Dr|Type, description|ux|Format  |Related |VolumeLabel| BM-Name  |Size MiB|
+---+-------------+--------+-------------------+
|01 |  |Prim 83 LinuxNatv| 1|EXT2    |Linux   |           |          |  2353.2|
|02 |  |FreeSpace Wasted |  |-- -- --|-- -- --|- - - - - -|          |    15.6|
|02 |  |Prim 83 LinuxNatv| 2|EXT3    |Linux   |           |          |  1427.6|
|03 |C:|Prim 0c FAT32-Ext| 3|FAT12   |mkdosfs |BIOS       |          |     7.8|
|04 |  |Prim ef Unknown  | 4|-       |unknown |           |          |     7.8|
+---+-------------+--------+-------------------+
|05>|  |Prim 07 Inst-FSys| 1|HPFS    |IBM 4.50|ECS1GB     |          |   981.9|
|07 |  |FreeSpace Pri/Log|  |-- -- --|-- -- --|- - - - - -|          |     0.4|
+---+--+-----------------+--+--------+--------+-----------+----------+--------+
  > = Active/Startable * = Bootable r = Removable R = Removable+Active/Bootable

[Edit]2 EeePC HDD Info by DaniS506.add V 1.8.1a

[Edit]3 EeePC HDD Info by IBM1S506.add

Last changed: 31.01.2008 10:39 by 62.143.146.175 -